Hardware Components; Components Of The Example Configuration - Siemens SINAMICS S120 Getting Started

Hardware components

4.1

Components of the example configuration

The following components are contained within the example configuration:
● CU320-2 DP from firmware version 4.5 with integrated Ethernet interface
● Smart Line Module (supply module)
● Line filter
● Double Motor Module
● Line reactor (for ALM and SLM)
● Synchronous servo motor with absolute encoder and DRIVE-CLiQ interface
● Standard PC with Windows operating system as a programming device (PG/PC), with
● Installed motor, power, and control cables
● DRIVE-CLiQ cables
● Ethernet interface in the PG/PC
● Ethernet connection between the PG/PC and the Control Unit
Getting Started
Getting Started, 01/2013, 6SL3097-4AG00-0BP2
pre-installed STARTER commissioning tool from version 4.3.
The following procedure uses the Windows XP operating system. With other operating
systems (such as Windows 7), operation may differ slightly.
4
17