Wiring The Power Inputs - Planet ISW-511 Series User Manual

2.1.4 Wiring the Power Inputs

The 6-contact terminal block connector on the top panel of Industrial
Fast Ethernet Switch is used for two DC redundant powers input.
Please follow the steps below to insert the power wire.
1. Insert positive / negative DC power wires into contacts 1 and 2 for
POWER 1, or 5 and 6 for POWER 2.
V1-
2. Tighten the wire-clamp screws for preventing the wires from
loosening.
1
Power 1
-
18
V1 + V2 - V2 +
2 3 4
Fault
+
5 6
Power 2
- +