Electronic Oven Controls; Display; Start Or Start/Enter; Cancel Or Off/Cancel - Whirlpool SF196LEPB3 Use And Care Manual

Cookware with nonstick surfaces should not be used under the
broiler.
Use the following chart as a guide for cookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
Cast iron Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or Follow manufacturer's instructions.
Ceramic glass
Heats slowly, but unevenly.
Ideal results on low to medium heat
settings.
Copper Heats very quickly and evenly.
Earthenware Follow manufacturer's instructions.
Use on low heat settings.
Porcelain See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.

ELECTRONIC OVEN CONTROLS

Style 1 - Electronic Oven Controls (on some models)
H
F
G
A. Display
B. Timer
C. Clock
D. Auto clean
E. Oven light pad
(on some models)
F. Sequence programming
(on some models)
G. Oven settings
B D E
A C
L
I J
K
H. Warming drawer
(on some models)
I. Temperature
J. Timed cooking
(on some models)
K. Hour/minute
(on some models)
L. Start/control lock
M. Cancel
Style 2 - Electronic Oven Controls (on some models)
K J
A. Oven display
B. Clock
C. Timer/cancel
D. Start/enter (control lock)
E. Auto clean
F. Off/cancel
When power is first supplied to the appliance, "PF" or a flashing
time will appear on the display. Press CANCEL or OFF/CANCEL
to clear "PF" or flashing time from the display.
If "PF" or flashing time appears, a power failure has occurred.
Press CANCEL or OFF/CANCEL and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
When performing a timed cook function, the display will show
either hours and minutes, or minutes and seconds.
The START or START/ENTER pad begins any oven function. If not
pressed within 5 seconds after pressing a function pad, the
"START?" indicator light will flash as a reminder. On some
models, "START?" will appear on the display.
If not pressed within 5 minutes after pressing a function pad, the
oven display will return to the time of day mode and the
programmed function will be canceled.
The CANCEL or OFF/CANCEL pad stops any function except the
Clock, Timer and Control Lock.
On some models, this is a 12-hour clock that shows a.m. and
p.m.
M
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Depending on your model, press the HR or MIN or TEMP/
TIME "up" or "down" arrow pads to set the time of day,
including a.m. or p.m.
3. Press CLOCK or START.
A B C D E
I H
G
G. Temperature/time
H. Cook time
I. Start time
J. Custom broil
K. Bake

Display

Start or Start/Enter

Cancel or Off/Cancel

Clock

F
7