When replacement of the cutting oxygen pressure
gauge is necessary, apply a single turn of Teflon tape
on the new gauge fitting threads and screw the gauge
into the block (83Z45).
E. CLEANING OF NOZZLES
Part No.
Description
6330-0121
5/16–18 Hex Steel Nut
6134-0086
1/4–20 x 3/8-in. Lg. Socket Head Capscrew
6124-0090
1/4–20 x 1-in. Lg. Socket Head Capscrew
6134-0113
5/16–18 x 1-in. Long Socket Head Capscrew
MOUNTING TUBE, 2-1/2" dia. (C-60-S) – 24Z91
Requires:
Rack (16 pitch) – 68Z43
(3) Screw – 61340086
(3) Washer – 87W66
Disks, Brackets & Hardware as illustrated
If orifices of the cutting nozzles become clogged, clean
them by hand with the correct size drills or soft brass
or copper wire. Cleaning drill sizes for nozzles are listed
in Cutting Tables. No other tools should be used, as
they might enlarge or bell-mouth the orifices.
HARDWARE
Part No.
6134-0117
6130-4181
6330-0121
6430-0110
6430-2186
OPTIONAL ACCESSORIES
MOUNTING TUBE, 1-3/8" dia. (C-60-S) – 24Z92
Requires:
5
Description
5/16–18 x 4-in. Lg. Socket Head Capscrew
1/2–20 x 1-in. Lg. Hex Hd. Steel Screw
5/16–18 Hex Steel Nut
5/16-in. Plain Steel Washer
1/2 x 11/16 x 1/16-in. Steel Lockwasher
Rack (24 pitch) – 51Z35
(2) Screw – 61103863
(2) Disk – 68Z28
Brackets & Hardware as illustrated