Surface Units and Reflector Bowls
Removing
Burn and Electrlcal
Shock Hazard
Make sure all surface
units are OFF before
removlng
surface
units and reflector
bowls.
Failure to do so can result in burns or
electrical
shock.
1.
Turn off ail surface units.
3. Pull the surface unit straight away
from the receptacle.
!. Lift the edge of the unit, opposite
the receptacle,
just enough to
clear the element hold down cliF
and the reflector bowl.
4. Lift out the reflector bowl. See
"Cleaning
Chari" on page 21 tor
cleaning
instructions.
continued
on next page
15