How To Stop - Razor E Prime Manual

EN

HOW TO STOP

For controlled stops, apply the brake by pressure on the rear-fender brake or electronic brake (on handlebar).
Razor recommends that you practice applying the brake options at various speeds and in an open area free from
obstructions before riding your scooter around others.
Option 1 - Press the electronic brake (on handlebar), the power will cut off and then product will slow to a stop.
Option 2 - Step on the rear-fender brake, the power will cut off and then product will slow to a stop.
OPTION 1
OPTION 2
54
NOTE: As an
additional safety
feature, the scooter
is designed to cut
power to the motor
when either brake
option is applied.
NOTE: Motor will
re-engage, (without
having to kick to
start), if brake is
released and throttle
is applied before
scooter has slowed
down to under
5 km/h (3 mph).
NOTE: Practice riding
only in wide open
areas clear from
curbs, parking blocks
and other obstacles.
Impacting the wheels
against any hard
surface can damage
the wheels. Wheels
are not covered under
the limited warranty.