Frequency/Voltage Control - ECS 761GXM-M Manual

Start Up PWM (128)
Enable you to set the start up PWM value.
Start Up Temprature (55)
Enable you to set the start up temperature of the smart fan.
Target Temprature (75)
This item enables throttling when CPU targets the temperature.
Slope Select PWM/C (4)
This item enables you to set the PWM value per degree.
Shutdown Temperature (Disabled)
Enable you to set the maximum temperature the system can reach before powering down.
Press <Esc> to return to the PC Health Status page.
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events, such as
System & CPU temperature, CPU & DIMM voltage, CPU & system fan speed,...etc.
• CPU Temperature
• System Temperature
• CPU Fan Speed
• System Fan Speed
• Vcore
• Vdimm
Press <Esc> to return to the main menu setting page.

Frequency/Voltage Control

This page enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by thekind of processor you have installed in your
system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Processor
Type : AMD Processor model unknown
CPU OVERCLOCK
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum
: Move
F1:General Help
Frequency/Voltage Control
200 (optional)
Disabled
Enter : Select F10: Save
+/-/: Value
F9: Optimized Defaults
Using BIOS
Help item
CPU Freq Over Clock
200 to 255 MHz
ESC: Exit
41