Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper
Description
Type
CLR_CMOS1 3-pin CLEAR CMOS
BIOS_WP1
2-pin BIOS PROTECT
(optional)
BIOS_WP1
3-pin
BIOS PROTECT
(optional)
Installing the Motherboard
Setting (default)
1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the CMOS,
make sure to turn the sys-
tem off.
OPEN: DISABLE
SHORT: ENABLE
1-2: DISABLE
2-3: ENABLE
9
1
CLR_CMOS1
BIOS_WP1
1
BIOS_WP1