Electrical Connections - Ferroli DIAMANT M Series Use And Maintenance Manual

DIAMANT M

2.16 ELECTRICAL CONNECTIONS

To allow the conditioner to start, make the electrical connections as shown in the wiring diagrams supplied with the unit.The two units
must be connected to an efficient earth circuit.The maker declines all liability if this precaution is ignored.
Note: When working on the electrical system, refer to the wiring diagrams supplied with the unit.For connections to the power and
control circuits, comply with the specifications shown in the following tables.
CHARACTERISTICS
Type of Power Supply
Circuit breaker
Wire section
Recommended cable H05RN-F or as installed. See specific legislation. The customer must install the automatic circuit breaker.
Mod. 18-2
MODEL
18-2
"
IG A
A mm2 3x2.5
B mm2 4x1.5
Outdoor unit
Indoor unit n°1
fig. 27 -
Cod. 3QE46140 - Rev. 00 - 11/2019
18-2
230/1/50
16 16
3x2.5
4x1.5
Indoor unit n°2
27-3 28-4
25 25
3x2.5 3x2.5
4x1.5 4x1.5
EN
39