S Etting The Controls - Whirlpool 9753051 Use And Care Manual

USING THE SELF-CLEANING CYCLE
S
ETTING THE CONTROLS
3.
Press the DELAY button.
4.
Set the start time.
Press the up
correct time shows on the display. The oven will
automatically determine the stop time by adding
the set cleaning time to the set start time.
5.
Press the START button.
The oven door will lock.
6.
When the Self-Cleaning cycle starts...
7.
When the Self-Cleaning cycle ends...
"LOCKED" goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.
To stop the self-cleaning cycle at any time:
If the oven temperature is above normal broiling
temperatures, the Self-Cleaning cycle will start a
30-minute cool down. The CLEAN and DOOR
LOCKED indicator lights will stay on.
26
.
( CONT )
or down button(s) until the
PRESS YOU SEE
DELAY
PRESS YOU SEE
HR MIN
PRESS YOU SEE
START
DELAY
YOU SEE
HEAT
TIMED
YOU SEE
PRESS YOU SEE
OFF
TIMED
YOU SEE
CLEAN
TIME
START
CLEAN
TIME
START
ON
LOCKED CLEAN
ON
LOCKED CLEAN
TIME
CLEAN
ON
LOCKED
CLEAN