Copy Mode; Display Indicator; Menus - Panasonic SV-PT1 Operating Instructions Manual

Copy Mode (Display Indicator)
POWER Lamp
COPY/TV
MODE
Displaying Menu (Indicator Flowchart)
Follow these steps to display menus in COPY mode.
1
Set COPY/TV MODE to "COPY".
2
Insert a Card. (p. 17)
3
Turn on this unit. (p. 18)
When using battery
Press SET
If a button is not pressed
within 10 seconds.
* When HDD SAFETY is
ON and is activated
(p. 18), the PC Card HDD
cannot be verified, so
always place unit on flat,
level surface.
– Note –
• Any cards that utilize adaptors other than the accessory PC Card HDD adaptor are displayed
as "PC CARD".
In Copy mode, data can be copied from one
card to another. You can also check card
storage capacity, make backups, set TV
formats, and format cards.
Liquid Crystal
If unit is on battery power only, power shuts off
Display
automatically if you perform no operation for
5 minutes to conserve battery.
When using AC adaptor
(When a PC Card
HDD is inserted)
(When an SD Memory
Card is inserted)
(When a PC Card and SD
Memory Card are inserted)
Press MENU
MENU
/SET
STANDBY/SET
*
*
"Copying" (p. 21)
"Menus" (p. 20)
(When a PC Card
is inserted)
19