Table of Contents
Advertisement
Warning and Instruction Displays
TV Mode (TV Screen Display)
Indications
COPY ERROR
DELETE ERROR
PROTECT ERROR
CAN'T READ
SETTING FILE
CAN'T DISPLAY
FOR HDD SAFETY
PUT UNIT DOWN
THIS FILE ISN'T EXIF
CAN'T SAVE THIS FILE
NO SUPPORT
FAT32 SD CARD
CANNOT SELECT
BATTERY LOW
COPY CANCEL
BATTERY LOW
NOT SELECTED
BATTERY LOW
PLEASE POWER OFF
DELETE EXCEPT
PROTECT AND CAN'T
VIEW FILE
CARD IS WRITE
PROTECTED
Reset Function
If an error occurs during an operation and
the unit no longer works, reset the unit as
follows.
Press CANCEL and STANDBY
simultaneously for 5 seconds.
• Unit is reset. Try operation again.
52
Condition
The specified operation did not execute correctly.
Reset the unit (see below), or turn power off, then
back on and repeat the operation.
An image file could not be displayed. The file is
corrupt or the format is incompatible.
The HDD SAFETY Detection Switch has activated
and the HDD has stopped for protection. Place the
unit on a flat, level surface.
Rotated images cannot be saved.
SD Memory Cards that have been formatted to
FAT32 specifications cannot be used.
Folders cannot be selected for Slide Show. Open a
folder, then select files.
The battery is spent. Operation will be canceled and
power will turn off. Recharge the battery.
The battery is spent. Copy operation will stop and
power will turn off. Recharge the battery.
The operation timed out due to no selection during a
Slide Show, presentation, copying, deleting or file
protecting operation. Repeat the selection.
Battery level is getting low. Turn off the power and
recharge the battery.
Protected files and files that cannot be displayed
cannot be deleted.
Card or file is protected. To continue the operation,
remove the protection.
CANCEL
STANDBY
Advertisement
Table of Contents
