Honda HSM1336i Owner's Manual page 62

OPERATION
3c. Clearing in MANUAL mode
Nothing is controlled automatically when the mode selector switch
is set in the MANUAL position. Engine speed and operating speed
can be adjusted freely by selecting the MANUAL mode.
THROTTLE CONTROL LEVER
MANUAL mode
RESET SWITCH
(USA model only)
60
3rd
CHUTE CONTROL
SWITCH
AUGER HOUSING
CONTROL SWITCH
1) Set the throttle control lever in the
third position from the bottom.
2) Operate the chute control switch to
adjust the snow discharge direction
and angle (see page 27).
3) Operate the auger housing control
switch to adjust the auger to be
parallel to the road surface (see
pages 50 and 52).
USA model only:
• You can return the auger to the
initial position by pushing the
reset switch.
• If you return the auger to the initial
position by pushing the reset
switch, the auger can hit against the
road surface or can be raised from
the road, resulting in some snow
left on the ground, depending on
the road condition and the position
of the snow blower.
Adjust the auger height position
as needed.