Operation - Honda HSM1336i Owner's Manual

Operation

1. Start the engine (see pages 44 through 46).
2. Select the snow clearing work mode.
– 1. Check that the main shift lever is in the N (neutral) position.
– 2. Select the appropriate work mode to clear the snow by turning
the mode selector switch to either the MANUAL, POWER, or
AUTO position.
Note that the operation and performance of the snow blower differ
according to the work mode you select. Select the appropriate work
mode for your situation (see pages 19 and 20 for the characteristics
of each mode).
Tips for selecting the work mode:
AUTO mode: see page 54.
1) Not familiar with operating the snow blower.
2) Does not want to operate the various switches while clearing the
snow.
3) Want to clear the snow as quietly as possible.
4) Want the auger to rise up as little as possible.
POWER mode: see page 57.
1) Want to adjust the traveling speed automatically according to the
workload while clearing the snow.
2) Want to throw the snow far from the snow blower.
3) Want to finish clearing the snow as quickly as possible.
MANUAL mode: see page 60.
Want to operate the switches as you like.
MODE SELECTOR SWITCH
MANUAL
OPERATION
AUTO
POWER
53