Table 2-3. NIC Indicator Codes
Indicator Normal Operation
Activity
Flashing amber indicates that network data is being sent or
received
Link
Steady green indicates that the network adapter is connected to a
valid link partner on the network.
Hot-Plug SCSI Hard-Drive Indicator Codes
Each SCSI hard-drive carrier has two indicators: a busy indicator and a status indicator (see Figure 2-4). The indicators provide information on the status of
the respective hard drive.
Figure 2-4. Hard-Drive Indicators
Table 2-4
lists the drive-status indicator codes. Different codes display as drive events occur in the system. For example, in the event of a hard-drive failure,
the "drive fail" code appears. After the drive is selected for removal, the "preparing for removal" code appears. After the replacement drive is installed, the
"preparing for operation, drive online" code appears.
The drive-busy indicator signifies whether the hard drive is active on the SCSI bus. This indicator is controlled by the hard drive.
Table 2-4. SCSI Hard-Drive Status Indicator Codes
Drive-Status Indicator
Drive bay empty
Drive being prepared for operation, drive online
Drive being identified, prepared for removal, or drive offline Blinks green 3 times per second at equal intervals
Drive rebuilding
Drive failed
Error Condition
When off at the same time that the link indicator is off, the network
adapter is not connected to the network.
When off at the same time that the activity indicator is off, the network
adapter is not connected to the network.
Indicator Code
Off
Steady green
Blinks green once per second
Steady amber