System Board Connectors - Dell PowerEdge 700 Installation And Troubleshooting Manual

Table A-1. System Board Jumper Settings
Jumper Setting Description
PSWD_EN The password feature is enabled.
(default)
The password feature is disabled.
NVRAM_CLR The configuration settings are retained at system startup.
(default)
The configuration settings are cleared at next system startup.
NOTE:
jumpered unjumpered

System Board Connectors

See Figure A-3 and Table A-2 for the location and description of system board connectors.
operating speeds.
Figure A-3. System Board Connectors
You can store a spare, unused jumper plug on one pin of the NVRAM_CLR jumper block.
Figure A-3 also lists expansion slot numbers, buses, and bus