Table of Contents
Advertisement
ECM-APL User's Manual
USB Mass Storage Driver Support
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices
3.6.2.12 Security Configuration
Item
TXE HMRFPO
TXE EOP Message
48 ECM-APL User's Manual
Disabled
Enable/Disable USB Mass Storage Driver
Enabled[Default]
Support.
1 sec
5 sec
The time-out value for Control, Bulk, and Interrupt
10 sec
transfers.
20 sec[Default]
10 sec
20 sec[Default]
USB mass storage device Start Unit command
30 sec
time-out.
40 sec
Maximum time the device will take before it
properly reports itself to the Host Controller. 'Auto'
Auto[Default]
Manual
uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken form Hub descriptor.
Mass storage device emulation type. 'AUTO'
Auto[Default]
Floppy
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
Forced FDD
Hard Disk
drives with no media will be emulated according
CD-ROM
to a drive type.
Options
Enabled
TXE HMRFPO.
Disabled[Default]
Enabled[Default]
Send EOP Message Before Enter OS.
Disabled
Description
Advertisement
Table of Contents
