Recording From Compact Discs; Tape-To-Tape Recording - Panasonic SC-AK200 Operating Instructions Manual

A
REC
B
2
1
1
DECK 1
OPEN
2
REC
22
RQT6085

Recording from compact discs

A
You can use 1-DISC/ALL-DISC/1-SONG mode (z page 18) to make
recordings.
Preparation:
•
Do the preparatory steps (z page 21).
•
Insert the disc(s) you want to record (z page 16).
1-DISC/ALL-DISC recording
1
Do steps 1 to 4 on page 18.
Ensure CD is stopped.
2
Press [a REC] to start recording.
The CD starts.
1-SONG recording
1
Do steps 1 to 5 on page 18.
2
Press [a REC] to start recording.
The CD starts.
To stop recording
Press [L/–DEMO].
Disc play stops automatically.
If the tape finishes before the disc
The disc continues playing. Press [L/–DEMO] to stop it.
To record programmed tracks
1 Program the tracks (z page 17).
2 Press [a REC] to start recording.
Play starts.
To stop recording, press [L/–DEMO].
Disc play stops automatically.

Tape-to-tape recording

B
The recording level will be recorded as it is on the tape being played
back.
Preparation :
•
Do the preparatory steps (z page 21).
•
Press [TAPE :] then [L/–DEMO] to select tape as the source.
1
Press [c DECK 1 OPEN] and insert the
tape you want to record.
2
Press [a a a a a REC] to start recording.
To stop recording
Press [L/–DEMO].
Both decks will stop.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.