Direct Access Play; Repeat Play; Cd Display - Panasonic SC-AK200 Operating Instructions Manual

2
3
1
2
3
A
B
DISPLAY
DISPLAY
Listening to compact discs

Direct access play

Remote control only
1
1
Press [DISC].
2
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
3
Press the numeric button to select the
desired track number.
The CD will be played from the selected track to the last track
of the disc.
To select a two-digit track
Press [ 10] and then the two numbers you want within 10 seconds or
so.
For example
Track no. 20: [ 10]
Track no. 35: [ 10]
Note
You cannot use direct access play with 1-SONG, 1-RANDOM or
A-RANDOM mode.

Repeat play

Remote control only
Press and hold [PLAY MODE] before or
A
during play.
"REPEAT ON" and "
To cancel repeat play
Press and hold [PLAY MODE] once again. "REPEAT OFF" is
displayed and "
To repeat your favorite tracks
1. Program the tracks you want (perform steps 1 ~ 6 on page 17).
2. Press and hold [PLAY MODE] and make sure "REPEAT ON" and
" " are displayed.
3. Press [CD :/ J]. Playback will start.
To use repeat play with CD Play Mode function
Set the desired mode (A page 18), press and hold [PLAY MODE]
before or during playback, and make sure "REPEAT ON" and "
are displayed.

CD display

B
This function allows you to display the remaining play time of the
current track.
During play or pause mode
Press [DISPLAY].
Every time you press the button:
Elapsed play time
Note
When track number 25 or greater is playing, remaining play time
display shows "– –:– –".
[2] [0]
[3] [5]
" are displayed.
" is cleared.
Remaining play time
"
19
RQT6085