Using The Timer; Using The Play/Record Timer; Timer Function - Panasonic SC-AK200 Operating Instructions Manual

5
2 • 3
1
FOR PLAY TIMER
CLOCK/ CL CK/
TIMER TIMER
2
FOR PLAY TIMER
CLOCK/ CL CK/
TIMER TIMER
3
FOR PLAY TIMER
CL CLOCK/ CK/
TIMER TIMER
4
FOR PLAY TIMER
PLAY
5
4
1 • 2 • 3
FOR RECORD TIMER
FOR RECORD TIMER
FOR RECORD TIMER
FOR RECORD TIMER
REC

Using the timer

Using the play/record timer

Remote control only
The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
Preparations
•
Turn the unit on and set the clock (A page 11).
•
For the play timer, prepare the music source you want to listen to;
tape, CD, radio or aux, and set the volume.
•
For the record timer, check the cassette's erasure prevention tabs
(A page 21: A), insert the tape in deck 2 (A page 21) and tune to
the radio station (A page 12) or select the aux source (A page
27).
1
Press [CLOCK/TIMER] to select the

timer function.

Every time you press the button:
CLOCK PLAY
Previous display
rPLAY : to set the play timer
rREC : to set the record timer
2
ON time setting
1
(Within 8 seconds or so)
Press [g/REW/4] or [3/FF/f] to
select the starting time.
Press [CLOCK/TIMER].
2
3
OFF time setting
Press [g/REW/4] or [3/FF/f] to
1
select the finishing time.
Press [CLOCK/TIMER].
2
The start and finish times are now set.
4
Press [rPLAY/REC] to display the timer
indicator.
Every time you press the button:
PLAY REC
(OFF)
rPLAY : to turn the play timer on
rREC : to turn the record timer on
(The indicator doesn't appear if the start and finish times or the
clock hasn't been set.)
5
Press [f] to turn the unit off.
The unit must be off for the timers to operate.
•
For play timer
The timer play will start at the preset time with volume
increasing gradually up to the volume level you pre-set.
•
For record timer
The record timer comes on about 30 seconds earlier than
the set time.
To cancel the timer
Press [rPLAY/REC] to clear the timer indicators from the display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when unit is on)
•
To change the play/record times
Do steps 1, 2, 3 and 5.
•
To change the source or volume
1. Press [rPLAY/REC] to clear the timer indicator from the display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
(Continued on next page)
REC
25
RQT6085