Windshield Wipers
In order to renew or release frozen
w indshield wiper blades, the w ind
shield wiper arms can be pulled out of
their recess by hand. Sufficient force
must be applied to overcom e spring
resistance.
In order to ensure operation of the
windshield w iper even w hen it is
snowing heavily, an overload p ro te c
tion has been installed. It becom es
effective if a certain wiping resistance
is exceeded as a result of snow
accumulation. The w indshield w iper
arm will then no longer return
com pletely to its initial position,
although the windshield w iper m otor
continues to run a full cycle.
Emergency Operation of Sliding Roof
If the electrically operated sliding roof
drive mechanism should fail, the roof
can be operated manually.
The drive motor, located on the left
side o f the trunk behind a cover, is
provided with a redcolored hex head.
Remove cover with a screw driver and
slip the spark plug w rench (or a
suitable hex socket with driver) onto
the hex head. Now move sliding roof
in desired direction by turning the
wrench.
To close the sliding roof turn wrench
clockwise.
Unlocking the Fuel Filler Flap
If the filler flap cannot be opened
because of a fault, w ithdraw the link of
the vacuum element (on RH side in
trunk).
4
75