Replacing Bulbs - Mercedes-Benz 300 SD Turbo Diesel 1982 Owner's Manual

Electrical System

Replacing Bulbs

Only handle new bulbs fo r headlamps
and tail lamps with tissue paper or
similar. Install only bulbs of pre­
scribed wattage. Refer to " Technical
Data and last page" .
Headlamp Aiming
I C orrect headlamp aiming is of para­
mount importance to the roadw orthi­
ness of the car. Check and readjust
headlamps at regular intervals and
invariably when a lamp has been
replaced.
72
Headlamp Unit
1 Headlamp vertical aiming screw
2 Headlamp horizontal aiming
screw
3 Fog lamp vertical aiming screw
4 Fog lamp horizontal aiming screw
5 Securing screw fo r housing of
turn signal, standing, side marker
and parking lamps
9 4 2 6
6 Securing screw fo r cover of
sealed-beam unit/halogen and
fog lamp
7 Sealed-beam unit/halogen
8 Securing screw s fo r sealed-beam
unit/halogen
9 Fog lamp
0 Securing screws fo r fog lamp