Hdmi Video Output - Xilinx ZC702 User Manual

Table 1-16 lists the USB connections between the XC7Z020 AP SoC PS Bank 501 and the
CP2103 UART bridge.
Table 1-16: XC7Z020 AP SoC to CP2103 Connections
XC7Z020 AP SoC (U1)
Pin Name Bank
PS_MIO48 501
PS_MIO49 501
Refer to the Silicon Labs website for technical information on the CP2103GM and the VCP
drivers [Ref 6].

HDMI Video Output

[Figure 1-2, callout 13]
The ZC702 board provides a high-definition multimedia interface (HDMI®) video output
using an Analog Devices ADV7511KSTZ-P HDMI transmitter at U40. The HDMI output is
provided on a Molex 500254-1927 HDMI type-A receptacle at P1. The ADV7511 supports
1080P 60Hz, YCbCr 4:2:2 encoding via 16-bit input data mapping.
The ZC702 board supports the following HDMI device interfaces:
• 16 data lines
• Independent VSYNC, HSYNC
• Single-ended input CLK
• Interrupt Out pin to XC7Z020 AP SoC
2
• I C
• SPDIF
Figure 1-15 shows the HDMI codec circuit.
ZC702 Board User Guide
UG850 (v1.2) April 4, 2013
UART Function
Pin
Number
D11 TX, data out
C14 RX, data in
www.xilinx.com
CP2103GM (U36)
Net Name
Pin
USB_UART_RX 24
USB_UART_TX 25
Feature Descriptions
UART Function
RXD, data in
TXD, data out
33