Ec1 - Curtis G4 Seraphim SERA2B User Manual

ERROR CODES
Warning Messages - Allows Brewer to Continue Brewing
MESSAGE DISPLAY
Maintenance Required
Low Water Flow
Warning
Error Messages - Brewer Will Stop Brewing
MESSAGE DISPLAY
Water Level Error
Sensor Error
Over Temp. Error*
Internal Error 1
* This error is disabled on CGC and Seraphim
MESSAGE DISPLAY
WARNING DESCRIPTION
Maintenance Required
Low Water Flow
in their settings.
ERROR DESCRIPTION
Open Sensor
Excess Temperature
®
models.
ERROR DESCRIPTION
UPM software revision does not support
the model selected.
CAUSE
Brew count "Gallons Since Reset" exceeds programmed
preventative maintenance period.
If the Inlet valve remains on longer than XX seconds (during
the brew cycle only) and repeats TWICE during that brew
cycle. It shall clear upon the next brew and if the same low
update needed.
CAUSE
Seraphim
Break in the temperature thermistor circuit or short circuit.
The sensor is reading that the temperature in the
shorted to ground.
CAUSE
The universal power module (UPM) has an old software
version and is not compatible with the brewer model in which
it has been installed.

EC1

E