Connecting To A Console Terminal Or Modem - Cisco VG310 Installing Manual

Installing the Cisco VG310 and Cisco VG320 Voice Gateways
2
Connect the battery to the DC input connector on your Cisco VG310 or Cisco VG320. The following figure
shows the DC power connector.
Figure 10: +12V DC Power Connector
1
Pinouts for the DC Power Connector
The following table provides information about the pinouts for the DC power connector on Cisco VG310 and
Cisco VG320.
Table 4: Pinouts for the DC Power Connector
Pin Number
1
2
3
4
5
6
7
8

Connecting to a Console Terminal or Modem

The Cisco VG310 or Cisco VG320 analog voice gateway unit has an asynchronous serial port and an auxiliary
port. These ports provide administrative access to the unit either locally (with a console terminal or a PC) or
remotely (with a modem). To configure the unit using the Cisco IOS CLI, you must establish a connection
between the console port on the voice gateway and either a terminal or a PC.
Battery
Pin 1
Connecting to a Console Terminal or Modem
2
Description
GND (input enable)
+12V (power)
REP_BAT (replace battery)
GND (power return)
ON_BAT (battery is on)
+12V (power)
LOW_BAT (battery is low)
GND (power return)
Installing the Cisco VG310 and Cisco VG320 Voice Gateways
Pin 5
17