Table of Contents
Advertisement
Programming the Instrument
5.3.1 Automatic Temperature Compensation
5.3.2 Manual Temperature Compensation
5.4 Programming mA Outputs
28
The sensor continuously measures the sample temperature. Concentration values
are automatically converted to a reference temperature of 25 °C. To set Automatic
Temperature Compensation:
1. From the Main screen, press the
2. Use the
LEFT ARROW
3. Use the
LEFT ARROW
4. Press
to select TEMP. COMP.
ENTER
5. In the TYPE field, select Auto with the
6. Press
to exit.
ESC
1. From the Main display, press the
2. Use the
LEFT ARROW
3. Use the
LEFT ARROW
4. Press
to select TEMP. COMP.
ENTER
5. In the TYPE field, select MANUAL with the
6. Enter the sample temperature. Press
the next menu option is highlighted.
The signals generated by the analog outputs allow measurement data to be
transmitted to any external control or recording device.
1. From the Main display, press the
2. Use the
LEFT ARROW
3. Use the
LEFT ARROW
4. Use the
LEFT ARROW
PROG, or TEST.
5. Program the parameters using
RIGHT ARROW
key to highlight PROGRAMMING. Press
key to highlight MEASURE. Press
RIGHT ARROW
RIGHT ARROW
key to highlight PROGRAMMING. Press
key to highlight MEASURE. Press
RIGHT ARROW
when finished. Press
ESC
RIGHT ARROW
key to highlight PROGRAMMING. Press
key to highlight mA OUTPUTS. Press
key to highlight OUTPUT 1, OUTPUT 2, SPECIAL
Table
7.
key.
.
ENTER
.
ENTER
key.
key.
.
ENTER
.
ENTER
key.
until
ENTER
key.
.
ENTER
.
ENTER
Advertisement
Table of Contents
