Setting The Frequency Of The Power Source; Using The Maintenance Function - Hach 9186 Instrument Manual

Programming the Instrument

5.12 Setting the Frequency of the Power Source

5.13 Using the Maintenance Function

32
1. From the Main display, press the
2. Use the
LEFT ARROW
3. Use the
LEFT ARROW
4. Choose the frequency of your power source. Press
Use this function during all instrument maintenance operations. The Instrument
will continue to display the measured values, but the outputs and relays
are frozen.
1. From the Main display, press the
2. Use the
LEFT ARROW
3. Enter the password, if necessary.
RIGHT ARROW
key to highlight SERVICE. Press
key to highlight CONFIGURATION. Press
RIGHT ARROW
key to highlight MAINTENANCE. Press
key.
.
ENTER
.
ENTER
to return to Display 2.
ESC
key.
.
ENTER