Cirrus SR22 Pilot Operating Handbook page 322

S 8: H
ECTION ANDLING AND
S
ERVICING
multiple flashes separated by 1-second periods, will begin to display
after approximately 1 second.
4. Flash Codes displayed with the associated conditions are as follows:
a 1-Flash: Indicates that the system is operational and that no error
conditions were found.
b 2-Flashes: Not used. If displayed, correct condition before further
flight.
c 3-Flashes: Not used. If displayed, correct condition before further
flight.
d 4-Flashes: Indicates low output power. If displayed, correct condi-
tion before further flight.
e 5-Flashes: Indicates no position data present. If displayed, correct
condition before further flight.
BAT1 must be powered on to provide position data to the ELT.
f 6-Flashes: Indicates G-switch loop is not present. If displayed,
correct condition before further flight.
g 7-Flashes: Battery check. If displayed, correct condition before
further flight.
h 8-Flashes: Indicates programming data missing. If displayed,
correct condition before further flight.
8-20
S
ERVICING
• N
OTE
•
C D
IRRUS ESIGN
SR22
P/N 13772-006
Reissue A