Flap Control Switch - Cirrus SR22 Pilot Operating Handbook

C D
IRRUS ESIGN
SR22
The wing flaps actuator, flap control switch and indicator lights are
powered by 28 VDC through the 10-amp FLAPS circuit breaker on NON
ESS BUS.

Flap Control Switch

An airfoil-shaped FLAPS control switch is located at the bottom of the
vertical section of the center console. The control switch is marked and has
detents at three positions: UP (0%), 50% and 100%. The appropriate V
speed is marked at the Flap 50% and 100% switch positions. Setting the
switch to the desired position will cause the flaps to extend or retract to the
appropriate setting. An indicator light at each control switch position illu-
minates when the flaps reach the selected position. The UP (0%) light is
green and the 50% and 100% lights are yellow.
P/N 13772-006
Reissue A
S 7: A
ECTION IRPLANE AND
S
YSTEMS
W F
ING LAPS
FE
7-23