ZyXEL Communications ARMOR G1 User Manual page 33

Table 4 Settings > System > Status (Bridge Mode) (continued)
LINK TAB
USB Application SAMBA
FTP
USB Media
Sharing
WiFi Main WiFi
MAC Filter
WPS
Scheduling
LAN LAN IP
System Status
General
Setting
Remote
Access
Maintenance
Operating
Mode
Logs
Chapter 3 The Web Configurator
FUNCTION
Use this screen
• Set up file-sharing via the NBG6818 using Windows Explorer or the
workgroup name
• Configure the workgroup name and create file-sharing user accounts
Use this screen to set up file sharing via the NBG6818 using FTP and create user
accounts.
Use this screen to configure settings for media sharing.
Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
Use the MAC filter screen to configure the NBG6818 to block access to devices
or block the devices from accessing the NBG6818.
Use this screen to configure WPS.
Use this screen to schedule the times the Wireless LAN is enabled.
Use this screen to configure the NBG6818's LAN IP address and subnet mask.
Use this screen to configure the IPv6 address for the NBG6818 on the LAN.
Use this screen to enable the NBG6818's DHCP server.
Use this screen to view the basic information of the NBG6818
Use this screen to change password or to set the timeout period of the
management session.
Use this screen to enable remote assistant.
Use this screen to upload firmware, reboot the NBG6818 without turning the
power off or reset the NBG6818 to factory default.
Use this screen to select whether your device acts as a router, or a bridge.
Use this screen to view the list of activities recorded by your NBG6818.
NBG6818 User's Guide
33