Whirlpool MIcrowave Ovens Use And Care Manual page 9

The display will show what you touched
This example shows 50% of full power.
Touch a Number Pad for
the Cook Power you
want.
Touch START.
d
count
own
Changing cook powers
l
Cook Power can be changed at any time during
-Touch COOK POWER
The COOK CYCLE 1 and COOK POWER Slg-
nal Lights WII stay on to show that the oven
is cooklng in the first cycle at a Cook
Power other than high
The Display counts down the time to show
how much cooking time IS left In the flrsl
cycle
For 2 of every 10 seconds, the Display WIII
show the Cook Power you selected
When the cooklng time ends. you will hear
4 beeps (You can stop the beeping by
opening the door or by touching CANCEL )
When the beeping stops, the Display WIII
show the time of day
the cooking cycle
-Touch a number for the new Cook Power
-Touch START The cycle will cook at the new Cook Power for the original time
OR...
-Touch COOK POWER twice If you want to change a lower Cook Power to high
-Touch START
Defrosting
-
Use QUICK DEFROST to thaw frozen food before cooktng For suggested defrost times, see
the guide on the Inside of the oven door or the chart in your MICRO MENUS* Cookbook
1.
2.
3.
l
Tmk
DO THIS...
Put frozen food in the
oven and close the
door.
Touch QUICK DEFROST.
Touch Number Pads for
the defrosting time you
want.
THIS HAPPENS...
The QUICK DEFROST Signal Light will come
on and the Display will show four O's
The Display will show the numbers you
touched in the order you touched them.
This example shows 2 minutes, 30 seconds
(continued on page 10)
9