Whirlpool MIcrowave Ovens Use And Care Manual page 10

Whirlpool mw8750xp microwave ovens user guide
Hide thumbs Also See for MIcrowave Ovens:
Table of Contents

Advertisement

4.
Touch START.
The QUICK DEFROST Signal
Light will stay on
to show that the oven is in the QUICK
DEFROST Cycle.
d
count
The Display
counts down the time to show
own
how much defrosting
time is left.
When the defrost time ends, you will hear 4
beeps.
[You can stop the beeping
by
opening
the oven door or touching
CANCEL.) When the beeping
stops, the
Dtsplay
will show the time of day
Standing
time
For best results, allow the food to stand for a while after defrosting.
This helps equalize
the temperature
of the food to provide
more even defrosting.
When COOK CYCLE 1 follows QUICK DEFROST, the oven automatically
provides
a
standing
time equal
to the time touched
in for QUICK DEFROST. COOK CYCLE 1 will
begin
after the automatic
standing
time
For a different
standing
time:
1 Touch QUICK DEFROST and desired
time
2 Touch COOK CYCLE 2.
3 Touch numbers
for desrred
standing
time
4 Touch COOK POWER.
5 Touch "0" for zero Cook Power
6 Touch START
When the QUICK DEFROST is over, the oven will shut off. The Display
will count down
the time for COOK CYCLE 2 at zero Cook Power. You will hear 4 beeps
when the
standing
time IS over
About the "QUICK
DEFROST" Cycle
The microwave
oven automatically
divrdes
the time set for the QUICK DEFROST
Cycle
into three equal
parts
- Frrst part
80% of full Cook Power,
-Second
part
50% of full Cook Power;
-Third
part
20% of full Cook Power.
This automatic
step-down
in Cook Power is an important'part
of the QUICK DEFROST
Cycle
It helps defrost food quickly
and completely
Changing
or adding
defrost time
You can change
the time setting any time while the QUICK DEFROST Cycle
is
operating.
1 Touch QUICK DEFROST.
2 Touch numbers
for the new time
3 Touch START.
Any new time settlng
made
while QUICK DEFROST is operating
will continue
the
defrostlng
only at 20% ot full Cook Power.
The best time to change
the setting
is near the end of the QUICK DEFROST Cycle,
1 Open the door.
2 Check
the food with long-tined
fork; if center area is hard frozen, set additional
time
Remember
that standing
time will further defrost the food.
3. Close the door and touch START to continue
the cycle
if no additional
time is
needed.
4. Or, touch in new instructions
if additional
time is needed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mw8750xp

Table of Contents