Usin - Whirlpool MIcrowave Ovens Use And Care Manual

Setting the clock
When the oven is first plugged in, the Display shows 88:88. If the electric power ever
goes off the Display will also show all 8's when the power comes back on.
You can cook or use the Minute Timer without setting the clock, but the display will be
blank after cooking The oven door must be closed before setting the clock.
1.
2.
3.
DO THIS...
THIS HAPPENS...
q
The Signal Light on the CLOCK SET pad WIII
.
come on Start touchrng number pads for the
desired trme within 5 seconds The Display
WIII show a "0 "
Touch CLOCK SET.
The Display will show what numbers you
touched in the order you touched them.
This example shows 3:25.
Touch Number Pads for
the correct time of day.
Touch START.
The Clock IS set when the CLOCK SET Signal
Light goes off
The Display will flash on and off if you have
touched in an incorrect time such as 12:65
Using the minute timer
TheMlnute~merdoesnotstartorstopcooking;itworksIikea kitchentimer.Setin
minutesorsecondsandyouwill heara beepwhenthesettime isup.Theovendoor
must be closed before setting the Minute Timer.
1.
2.
3.
DO THIS...
Eli!
Touch MINUTE TIMER.
q mm
Touch Number Pads for
minutes and seconds.
m
Touch START.
THIS HAPPENS...
d
count
own
gEE
P
The MINUTE TIMER Signal Light WIII come on
and the Display
will
show a "0 " Within 5
seconds start touching number pads for
the desired time
The Display will show what numbers you
touched in the order you touched them.
This example shows 1 minute, 45 seconds.
The MINUTE TIMER Signal Light
WIII
stay on to
show that the Minute Timer
IS
running
The Display counts down the seconds to
show how much time
IS
left on the Minute
Timer
When the set time IS up, you will hear a long
beep and the Display will show the time of
day