Whirlpool MIcrowave Ovens Use And Care Manual page 12

The COOK POWER Signal Light will come on
and the Display will show two O's
Touch COOK POWER. (It
you want the hlgh Cook
Power, sklp to step 10.)
Touch a Number Pad for
the Cook Power you
want In the second
cycle.
10. Touch START.
d
count
own
than high All other Signal Lights will go off
The Drsplay counts down the cooking time
to show how much time is left in each
cycle
For 2 of every 10 seconds of countdown,
the Display wtll show the Cook Power you
selected, if you are using a Cook Power
other than high
You will hear one beep at the end of COOK
CYCLE 1 You can either open the door to
check the food, or you can let the oven
start the next cycle If you do open the
door, touch START after closing the door to
d
count
own
other than high
The Display counts down the time to show
how much time IS left in the second cycle
In 2 out of every 10 seconds, the Display
will
show the Cook Power you selected if you are
using a Cook Power other than high.
When the last cvcle ends vou will hear
4 beeps. [You can stop the beeping by
opening the door or touching CANCEL.) When
the beeping stopsthe Display will show the
time of day
Changing or adding instructions
You can change times, Cook Powers, or add COOK CYCLE 2 at anytime during oven
operation.
1 Touch the Cook Cycle you wish to change or add (COOK CYCLE 1 or 2).
2 Touch numbers for new time, if desired.
3 Touch COOK POWER, if desired.
4 Touch number for new Cook Power or touch COOK POWER again if high is desired
5 Touch START
12