Space Required - Whirlpool Microwave Oven Installation Instructions Manual

aGIl
A
Installing optional
vent hood above
eyelevel micro-
wave range
Position appliance so that front and back are
accessible.
Knockout plug is at right rear of oven top panel.
Use hammer and screwdriver as shown to remove
knockout plug.
A. Space required
WITH VENT HOOD
:%RALL HEIGHT
EYE-LEVEL RANGE
FIG. 15
uq/-y
,
Install vent hood BEFORE making final electrical
connection.
When measuring, remember that leveling legs will be
adjusted. Total height needed for vent hood is 72" with
legs not extended.
The top of the vent hood may be installed against bot-
tom of overhead cabinets.
B. Remove knockout plug
REMOVE
6
c.
Connect vent hood
POWER SUPPLY POWER SUPPLY
RECEPTACLE RECEPTACLE
FIG. 17 FIG. 17
Reach through hole in bottom of vent hood, pull out
power cord until all slack is removed.
Place vent hood on the top of the oven. Lift front of vent
hood and connect vent hood power cord to the recep-
tacle in the top of the oven.
Rest vent hood on the top of the oven.