Display Off; Memory Function - Dimplex DCMIST25 Instruction Manual

Functions
MIST
To activate the MIST function, press the MIST button once to turn on. Ensure there
is enough water in the water tank. The LED indicator light will illuminate once
activated. Press this button again to turn off the MIST function, and to use as a fan
only. The unit is also equipped with the below functions.

DISPLAY OFF

When the unit is working, after 40 seconds of any buttons being pressed, the
indicator lights will turn OFF. Press any button (except for the ON/OFF button) and
the indicator lights will reactivate.

MEMORY FUNCTION

This unit has a memory function. When the fan is turned OFF, it memorises the
settings previously used. When the unit is turned ON again, it will start in the same
settings as previously used (unless the power supply was fully disconnected). If the
unit was in SLEEP mode previously, it will start in natural wind mode.
AUTO OFF
If there isn't any change in settings after 15 hours of constant use, the unit will turn
OFF automatically. This is an additional safety feature in case the unit is left ON
accidentally.
REMOTE CONTROL
This unit comes with a remote control, and all settings can be controlled via the
remote.
9