Table of Contents
Advertisement
The Calibration Indicator
While the instrument is zeroing, any key presses you make are stored, and are
executed when the zero operation is finished.
Switching the Power Meter Off
To switch the power meter off:
1. Press
( - 1 .
-
Configuring the Wavelength
The wavelength is shown at the bottom of the display in the middle.
There are four calibrated wavelengths that you can choose from:
8
850nm
1300nm
1310nm
1550nm
-
To
change the wavelength
1. Press
repeatedly until the wavelength you want is shown.
The Sel
X
Key and the Wavelength Display
Making Measurements
1-3
Advertisement
Table of Contents
