Table of Contents
Advertisement
3.
Loosen the three Phillips captive screws (3) that secure the fan to the computer, and then remove the
fan from the computer (4).
Reverse this procedure to install the fan assembly.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 6-11
Heat sink descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Disconnect the battery cable from the system board (see
Remove the heat sink:
1.
In the order indicated on the heat sink, loosen the four captive Phillips screws (1) that secure the heat
sink to the computer.
54
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
33).
Spare part number
M27459-001
33).
Battery on page
43).
Hide quick links:
Advertisement
Table of Contents
