Nfc Module - HP EliteBook 835 G7 Maintenance And Service Manual

5. Remove the touchpad from the computer (5).
Reverse this procedure to install the touchpad.

NFC module

To remove the NFC module, use this procedure and illustration.
Table 6-9 NFC module description and part number
Description
NFC module
NFC module cable (included in Cable Kit)
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the NFC module:
1. Disconnect the system board cable from the ZIF connector on the NFC module (1).
2. Disconnect the touchpad cable from the reverse ZIF connector on the NFC module (2).
52 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 33).
Battery on page 43).
Spare part number
M07214-001
M08526-001
33).