Front Fender Installation; Under Pedal Closeout Panel Removal - Husqvarna HUV 4214 2009 Maintenance And Service Manual

4
Front Body
1173
Figure 4-19 Front Fender Hardware – removal
5. Drill out rivets that secure the bottom of the front fenders to the frame (Figure 4-20, Page 4-12).
1178
Figure 4-20 Front Fender Hardware – rivet removal
6. Pull the instrument panel back enough to free front fender.
7. Remove front fender from vehicle.

FRONT FENDER INSTALLATION

1. Install front fender in the reverse order of removal.
2. Tighten front fender hardware to 22 in-lb (2.5 N·m).

UNDER PEDAL CLOSEOUT PANEL REMOVAL

1. Drill out rivets that secure the closeout panel to the frame (Figure 4-21, Page 4-13).
Page 4-12 2009-2010 HUV 4214, HUV 4414, and HUV 4414X Maintenance and Service Manual
BODY AND TRIM