*
1
: Left-hand drive vehicles only
*
2
: Right-hand drive vehicles only
■
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb
●
may need replacement. (P. 452)
If the replaced fuse blows again, have the vehicle inspected by your
●
Toyota dealer.
■
If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
■
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than indicated, or use any
●
other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
●
Do not modify the fuse or the fuse box.
NOTICE
■
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
FJCRUISER_OM_General_OM35B53W
4-3. Do-it-yourself maintenance
4
451