Toyota FJ CRUISER Owner's Manual page 193

Hide thumbs Also See for FJ CRUISER:

Table of Contents

2-4. Using other driving systems

● When any part of the vehicle sags

A margin of error

When approaching three-dimensional objects

It is not possible to determine the position of three-dimensional

objects (such as vehicles) using the vehicle width extension guide

lines and distance guide lines. When approaching a three-dimen-

sional object that extends outward (such as the flatbed of a truck),

be careful of the following.

● Vehicle width extension guide lines

FJCRUISER_OM_General_OM35B53W

When any part of the vehicle

sags due to the number of pas-

sengers or the distribution of the

load, there is a margin of error

between the guide lines on the

screen and the actual distance/

course on the road.

Visually check the surroundings

and the area behind the vehicle.

In the case shown in the illustra-

tion, the truck appears to be out-

extension guide lines and the

vehicle does not look as if it hits

the truck. However, the rear

body of the truck may actually

cross over the vehicle width

extension guide lines. In reality if

you back up as guided by the

vehicle width extension guide

lines, the vehicle may hit the