Husqvarna 520iHT4 Workshop Manual page 20

3. Attach the 2 screws.
4. Lubricate the parts shown in the illustration. Use
approximately 2.5 g of grease on each part.
5. Lubricate the gearbox cover and attach it with the 6
screws.
20 - Repair instructions
6. Attach the bracket.
7. Put the cables through the gear joint and assemble
the gear joint.
8. Attach the gear joint with the 5 screws. Tighten the
screws in the sequence shown in the illustration.
1
4
2
3
9. Connect the transport mode sensor.
1235 - 001 -