Controlling Using Protocols - Epson WF-C878R Series User Manual

Administrator Information
Also, you can use Web Config by connecting the printer directly to the computer using an Ethernet cable, and then
entering the IP address into a web browser. The printer can be connected in a secure environment after the security
settings have been completed.

Controlling Using Protocols

You can print using a variety of pathways and protocols.
If you are using a multi-function printer, you can use network scanning and PC-FAX from an unspecified number
of network computers.
You can lower unintended security risks by restricting printing from specific pathways or by controlling the
available functions.
Controlling protocols
Configure the protocol settings.
1. Access Web Config and then select the Network Security tab > Protocol.
2. Configure each item.
3. Click Next.
4. Click OK.
The settings are applied to the printer.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 348
&
"Protocols you can Enable or Disable" on page 494
&
"Protocol Setting Items" on page 495
&
Protocols you can Enable or Disable
Protocol
Bonjour Settings
iBeacon Settings
SLP Settings
WSD Settings
LLTD Settings
>
Advanced Security Settings
Description
You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
You can enable or disable the iBeacon transmission function. When enabled, you can search
for the printer from iBeacon-enabled devices.
You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
>
Controlling Using Protocols
494