Epson WF-C878R Series User Manual page 451

Administrator Information
❏ Read more file
Click when you want to import multiple files.
10. Click Import, and then click OK on the import completion screen.
Return to the device's property screen.
11. Click Transmit.
12. Click OK on the confirmation message.
The settings are sent to the printer.
13. On the sending completion screen, click OK.
The printer's information is updated.
Open the contacts from Web Config or printer's control panel, and then check that the contact is updated.
Cooperation between the LDAP Server and Users
When cooperating with the LDAP server, you can use the address information registered to the LDAP server as the
destination of an email or fax.
Configuring the LDAP Server
To use the LDAP server information, register it on the printer.
1. Access the Web Config and select the Network tab > LDAP Server > Basic.
2. Enter a value for each item.
3. Select OK.
The settings you have selected are displayed.
LDAP Server Setting Items
Items
Use LDAP Server
LDAP Server Address
LDAP server Port Number
Secure Connection
Certificate Validation
>
Settings to Use the Printer
Select Use or Do Not Use.
Enter the address of the LDAP server. Enter between 1 and 255 characters of
either IPv4, IPv6, or FQDN format. For the FQDN format, you can use alphanumeric
characters in ASCII (0x20-0x7E) and "- " except for the beginning and end of the
address.
Enter the LDAP server port number between 1 and 65535.
Specify the authentication method when the printer accesses the LDAP server.
When this is enabled, the certificate of the LDAP sever is validated. We
recommend this is set to Enable.
To set up, the CA Certificate needs to be imported to the printer.
451
>
Making Contacts Available
Settings and Explanation