Before You Begin - Razor PowerWing Owner's Manual

BEFORE YOU BEGIN

Remove contents from box and check parts against part diagram below. Remove the separators that protect the
components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked
cables that may have occurred during shipping. Because the PowerWing is partially assembled and packed at the
factory, there should not be any problems even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Allow up to 15–20 minutes for assembly. Razor recommends assembly by an adult.
Collar Clamp
Front Wheel
Required Tool
Two (2) 5 mm Allen Wrenches
(Included)
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Brake Lever
Handlebar Stem
Right Platform
1.
Frame
Left Platform
Rear Caster
Rear Wheel
2
WARNING: DO NOT
USE NON-RAZOR PRODUCTS
WITH YOUR POWERWING. The
PowerWIng has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
the warranty.
Product ID Locations:
(See locations to the left)
1. Side of frame
2. Barcode on side of box
(not shown)
Box Contents:
• PowerWing
• Allen Wrenches
• Owner's Manual