Table of Contents
Advertisement
FX-USB-AW/FX
-USB-BD USER'S MANUAL
3U
USB Driver Installation Edition
1.
Outline and Specifications
1.1
Outline
This manual explains the installation method of the USB driver software for FX-USB-AW and FX
The FX-USB-AW and FX
For the mounting, hardware specification and applicable standard of the FX-USB-AW or FX
to the each product user's manual.
1.2
Specifications
For the hardware specifications of the FX-USB-AW or FX
1.2.1
Performance Specifications
1) FX-USB-AW
Current consumption
Level Conversion
Baud Rate
Transmission standard
Signal name
(Port)
2) FX
-USB-BD
3U
Current consumption
Isolation
Baud Rate
Transmission standard
Port
1.2.2
USB Cable Specifications
Signal name
(Port)
Length of cable
6
-USB-BD use the same USB driver software.
3U
Item
• 15mA / 5V DC (5V DC power is supplied from the internal power supply of PLC)
• 30mA / 5V DC (5V DC power is supplied from the USB connector of personal computer)
Bidirectional between RS-422 and USB (Between signals are isolated by photocoupler.)
115200 bps, maximum (The baud rate is different in PLC.)
USB2.0 (For full speed)
To PLC
RS-422 (Mini-DIN 8Pin male)
To a cable
USB (Mini-B plug female)
Item
• 15mA / 5V DC (5V DC power is supplied from the internal power supply of PLC)
• 30mA / 5V DC (5V DC power is supplied from the USB connector of personal computer)
Photocoupler isolation (Between communication line and CPU)
9600/19200/38400/57600/115200 bps
USB2.0 (For full speed)
USB (Mini-B plug female)
Item
To FX-USB-AW or FX
-USB-BD USB (Mini-B plug male)
3U
To PC
-USB-BD, refer to the each product user's manual.
3U
Specification
Specification
USB (A plug male)
5m (196.9") at most (Included cable is 3m(118.1").)
1 Outline and Specifications
3U
-USB-BD, refer
3U
Specification
1.1 Outline
-USB-BD.
Advertisement
Table of Contents
