Connecting Procedure; Connecting Procedure Of The Fx-Usb-Aw; Connecting Procedure Of The Fx 3U -Usb-Bd - Mitsubishi Electric MELSEC-F FX-USB-AW User Manual

FX-USB-AW/FX -USB-BD USER'S MANUAL
3U
USB Driver Installation Edition
2.2

Connecting Procedure

2.2.1

Connecting Procedure of the FX-USB-AW

1) Power off the PLC.
2) Connect the USB (Mini-B plug male) connector of the USB cable to the FX-USB-AW.
3) Connect the RS-422 (Mini-DIN 8Pin male) connector of the FX-USB-AW to the PLC.
4) Connect the USB (A plug male) connector of the USB cable to the personal computer.
5) Power ON the PLC.
6) Power ON the personal computer.
7) Make sure the POWER lamp of the FX-USB-AW is lit.
(The POWER lamp of FX-USB-AW lights up when power is supplied normally by the personal computer.)
2.2.2 Connecting Procedure of the FX
1) Power off the PLC.
2) Connect the USB (Mini-B plug male) connector of the USB cable to the FX
3) Connect the USB (A plug male) connector of the USB cable to the personal computer.
4) Turn ON the power supply of the PLC.
5) Turn ON the power supply of the personal computer.
2 System Configuration and Connecting Procedure
-USB-BD
3U
2.2 Connecting Procedure
-USB-BD.
3U
1
2
3
4
5
6
7
9