Windows 7 - Mitsubishi Electric MELSEC-F FX-USB-AW User Manual

Usb driver installation edition
Table of Contents

Advertisement

FX-USB-AW/FX
-USB-BD USER'S MANUAL
3U
USB Driver Installation Edition
5.3

Windows 7

• USB driver Ver. 1.30 or later is applicable to Windows
• USB driver Ver. 1.40 or later is applicable to Windows
Please uninstall the driver with the following procedure.
Caution
Driver software must be uninstalled starting with "Ports (COM & LPT)" after which the "Universal Serial Bus
controllers" should be uninstalled.
If uninstalling directly from the "Universal Serial Bus controllers", the driver software for the FX-USB-AW
and FX
-USB-BD will not uninstall correctly.
3U
When uninstalling from "Universal Serial Bus controllers", uninstall USB driver software after re-installation
starting with "Ports (COM & LPT)" after which the "Universal Serial Bus controllers" should be uninstalled.
may be displayed when the installation of the driver is not performed normally. In that case, select the
item that has
1) Connect the FX-USB-AW or FX
Click [ Start ] → [ Control Panel ] → [ System and Security ] → [ Device Manager ] and the window below
will be displayed.
Double-click or right-click [ FX-USB-AW/FX3U-USB-BD (COM*) ] in [ Ports (COM & LPT) ], and select
[ Properties ].
* indicates the COM number used in the FX-USB-AW or FX
56
displayed next to it and uninstall with the following procedure.
-USB-BD to the personal computer via a USB cable.
3U
7 32-bit version.
7 64-bit version.
-USB-BD.
3U
5 Uninstalling Driver
5.3 Windows 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec-f fx3u-usb-bdMelsec-fFx-usb-awFx3u-usb-bd

Table of Contents