COMSPHERE 3000 Series Carrier
Figure 3-2. COMSPHERE 3000 Series Carrier Mounting Brackets
Installation
The cabinet that the carrier will be installed in may or
may not have threaded screw holes.
If the cabinet has threaded screw holes, use the
short Phillip-head screws included in the hardware
package and follow the first procedure in this
section.
If the cabinet does not have threaded screw holes,
use the speed nuts and the longer Phillips-head
screws (that look like washers are molded onto
them) included in the hardware package and follow
the second procedure in this section.
3-6
Installing the carrier may be a
2 person task; one person to hold
the carrier in proper alignment,
and one person to install the
screws.
December 1994
NOTE
3000-A2-GA31-80